Flexible packaging
Your production line is your competitive edge.
In flexible packaging, every minute either makes money or burns it.
Film sticking to nip and chill rolls, adhesive wrap-ups, web breaks,
and unplanned stops quietly erode margin and throw off schedules.
Food-facing film
Adhesive lamination
Nip & chill rolls
Wrap-up reduction
- Fluoro-Clear (FEP) sleeves for general non-stick service on packaging and converting lines.
- Fluoro-Flex (PFA) sleeves for high-speed lines and deflecting rubber nip rollers.
- Fluoro-Stat (Conductive PTFE) for solvent and high-static environments where discharge risk matters.
Request flexible packaging leave-behind
Pulp and paper industry
Cleaner rolls, longer life, more predictable outages.
Fluoron sleeve applications in paper include dryer, canvas, spreader,
guide, felt, and calender rolls. The sleeve story is focused:
resist corrosion and stickies buildup, reduce scraping, stabilize
sheet quality, and limit static-related defects.
- Fluoro-Clear (FEP) and Fluoro-Stat (Conductive PTFE) sleeves on dryer, canvas, and spreader rolls.
- FS-102 Fluoro-Stat conductive high-wear PTFE for low-moisture, static-prone positions.
- Specialty Fluoro-Flex (PFA) and reinforced Fluoro-Wear (PTFE) options for nip, lamination, extrusion, and compression rolls.
Request paper reference PDF
Food & hygienic packaging
Clean release without turning sanitation into a production event.
Food and medical packaging lines need low-friction, cleanable surfaces
that support regulated production. Fluoro-Clear (FEP) and Fluoro-Flex (PFA) options help keep
rolls non-stick and easy to clean while matching temperature and
extractable requirements.
- FDA-oriented Fluoro-Clear (FEP) and Fluoro-Flex (PFA) sleeve options for clean release.
- High-temperature Fluoro-Flex (PFA) where operating windows exceed standard FEP.
- Clear Fluoro-Clear (FEP) where inspection of the nip or roll surface matters.
Spec a sleeve for this application →
Converting & laminating
Keep webs on path instead of wrapped around problem stations.
Label, tape, film, foil, printing, laminating, and slitting lines all
punish dirty or high-friction roller surfaces. Fluoron sleeves create
a low-friction fluoropolymer barrier so adhesives and films release
cleanly across long runs.
- Fluoro-Wear (PTFE) roll covers for hard-to-release adhesives and premium low-friction service.
- Fluoro-Stat (Conductive PTFE) on slitter, rewinder, and dry-end rolls where static control is critical.
- Fluoro-Flex (PFA) sleeves for repeated nip cycles, flex fatigue, and elevated temperature service.
Spec a sleeve for this application →
