Easy Clean by Fluoron
Food-grade roller covers that cut sanitation time
Short answer: Easy Clean covers are heat shrink sleeves made from food-grade FEP fluoropolymer. They go over your conveyor and process rollers so product can’t stick, which can cut regular and allergen line cleans by about 20%. Your own maintenance techs can install and replace them with a hot air gun.
Download the Easy Clean sheet (PDF)

The problem with bare rollers
On food lines, product builds up on rollers fast: dough, chocolate, sugar, cheese, batter. That buildup means heavy scraping during sanitation, longer allergen changeovers, belts that wander off track and bearings that wear out early. Every extra minute of cleaning is a minute the line isn’t running.


What changed after 16 hours of production
Same line, same product, 16 hours of running. On the left, a bare roller. On the right, the same position with an Easy Clean cover.


What it saved one food plant
Here’s a cost savings example from a food production line that switched to Easy Clean covers:
Line clean, allergens included (minutes)
Downtime per day (minutes)
Belts and bearings per month
Why product lets go
FEP is a fluoropolymer, the same family as Teflon™. It has one of the lowest surface energies of any material, so sticky product beads up instead of wetting out and grabbing the roller. It’s also smooth and non-porous, so there’s nothing for product to lock into. Read more in our guide to how buildup sticks to rolls.
Benefits
- Food-grade FEP, FDA compliant for food contact
- About 20% faster regular and allergen line cleans
- No more heavy scraping, and cleans by hand
- Fewer people needed for sanitation
- Less belt tracking and fewer belt replacements
- Less damage to equipment from product buildup
- Easy to install and easy to replace
- 0.020" and 0.060" thickness


How installation works
- Send us the roller diameter and face length, or a drawing.
- We make the FEP cover pre-expanded to fit your roller.
- Your tech slides it on and shrinks it down with a hot air gun.
- When a cover wears out, cut it off and shrink on a new one.
Want us to do it? We also install on site.
Common questions
Are Easy Clean covers food safe?
Yes. They’re made from food-grade FEP fluoropolymer, which is FDA compliant for food contact.
How are they installed?
Your maintenance team slides the cover over the roller and shrinks it on with a hot air gun. No oven, no adhesive, no machining. We also install on site if you’d rather we do it.
What thickness should I use?
0.020" (0.5 mm) for most conveyor and guide rollers. 0.060" (1.5 mm) for rollers that see more wear or scraping.
How do I clean them?
By hand, with your normal sanitation chemicals. Product doesn’t bond to FEP, so it wipes off instead of needing to be scraped.
Can you cover rollers that are already pitted?
Usually, yes. The cover goes over the damaged face and gives you a smooth, cleanable surface again.
What about rolls that see a doctor blade or heavy abrasion?
A sleeve isn’t the right answer there. Our sister company AEGIS Advanced applies food-grade release coatings for those positions.
TEFLON™ is a trademark of The Chemours Company FC, LLC, used under license by Fluoron.
Spending too long cleaning rollers?
Tell us the line, the rollers and what’s sticking. We’ll size the covers and quote them.